The tire shredder processes the tire into 25-50 mm rubber blocks at room temperature, which is convenient for subsequent process crushing and grinding into 10-30 mesh rubber powder. It is important for the classification and recovery of steel wire, fiber, and rubber powder in the waste tire treatment. One of the devices.
The equipment has the characteristics of compact structure, low energy consumption and high efficiency. The shredding room of the equipment has a split structure, which is especially convenient for maintenance. The cutter is made of hard alloy, which has high hardness, high wear resistance, can be repeatedly used and repaired, and has a longer service life. The rotating screen is a steel wire mesh structure with a large blanking area, which is conducive to the screening of qualified rubber.
The motor drives the cutter head in the crushing chamber to rotate through the transmission system, and then sends the tire with the outer diameter ≤ 1200mm of the tire lip steel ring removed to the feeding hopper of the device using a conveyor. The tires are shredded by cutting and tearing. During the shredding process, materials less than or equal to 50 × 50 leak out of the circular screen and enter the subsequent process; materials greater than 50 × 50 are returned to the The shredder chamber shreds cyclically until the size of the rubber block meets the requirements and exits the shredder.